CO₂ Laser Marking Machines
Clean marking and engraving on wood, acrylic, leather, glass and other non-metal materials, with desktop and inline configurations.
Sample marking and material advice before you order. Shipping worldwide.
Best for, and what to avoid
Best for
- Wood, acrylic and leather
- Gifts, decor and signage
- Engraving and light cutting
Not the best fit
- Bare metal (use fiber)
- Heat-sensitive plastics (use UV)
- High-speed metal marking
Typical production
- Desktop engraving
- Packaging date coding
- Personalisation and gifts
What this series can mark
Short clips from real marking jobs. Final contrast and cycle time depend on the material, surface finish and settings.
What you can mark, and how
| Material | Recommended source | Typical result | Notes |
|---|---|---|---|
| Wood | CO₂ | Warm, deep engraving | Air-cooled desktop |
| Acrylic | CO₂ | Bright, clean engraving | Cut and engrave |
| Leather | CO₂ | Soft, even contrast | Personalisation |
| Glass | CO₂ | Fine surface marking | Coated glass best |
| Paper / board | CO₂ | Date and batch codes | Packaging |
| Bare metal | Fiber | Permanent mark | CO₂ limited on metal |
Choose a model
Select a configuration to see its specifications, or compare every model in the table below. Final configuration and price are confirmed in the quotation.
| Model | Group | Power | Laser source | Marking range | Speed | Best for |
|---|---|---|---|---|---|---|
| T-C30 | Desktop CO₂ | 30W | DAVI | 110 × 110 mm (options available) | ≤ 12,000 mm/s | Desktop wood, acrylic, leather and gift production. |
| YT-C40 | Flying CO₂ | 40W | DAVI | 110 × 110 mm (options available) | ≤ 12,000 mm/s | Inline marking on wood, packaging and non-metal products. |
| YT-C60 | Flying CO₂ | 60W | DAVI | 110 × 110 mm (options available) | ≤ 12,000 mm/s | Higher-power inline CO₂ marking and production work. |
Backed from sample to support
Common questions
Can a CO₂ laser mark metal?
Not bare metal well. Use a coating spray for a temporary mark, or a fiber laser for permanent metal marking.
Which software does it use?
Most CO₂ machines run LightBurn. Profiles are available on the downloads page.
What is the tube service life?
The laser tube has a service life measured in hours and is a predictable replacement cost. We confirm it in the quotation.
Can it cut and engrave?
Yes. CO₂ engraves deeply and cuts thin wood, acrylic and paper.
Related guides
The DOSLASER CO₂ range includes a desktop model for flexible jobs and flying configurations for packaging lines and moving products. Because the 10.6 μm wavelength is absorbed well by organics, CO₂ gives deep, natural contrast on materials that fiber lasers struggle to mark.
Common CO₂ laser engraving jobs
- Wood signs, gifts and personalisation
- Acrylic awards, displays and keychains
- Leather wallets, belts and tags
- Glass engraving and paper marking
Most of our CO₂ machines run LightBurn, a widely used laser control program, so setup is straightforward. Download ready-made profiles from the manuals and downloads page, or compare models in the CO₂ laser series.
Desktop or inline CO₂ laser configuration
The T-C30 desktop model is made for workshops that switch between wood, acrylic, leather and gifts. For packaging and moving products, the YT-C flying series brings the same CO₂ marking to a production line, so you can mark without stopping the flow.
Because the source is air-cooled on most CO₂ models, setup stays simple and maintenance is limited to lens cleaning and routine checks.
Software and maintenance for CO₂ machines
Most DOSLASER CO₂ machines run LightBurn, so you can send jobs, set power and speed, and manage a material library from one program. Maintenance is mostly lens cleaning and checking the laser tube over its service life, which keeps running costs predictable. Ready-made profiles for common materials are available on the downloads page.
Compare with the fiber laser for metal and the UV laser for plastics and glass before deciding.
Send us your part and mark content
We will confirm the laser source, power and marking area, run a sample, and send a clear quotation with shipping to your door.
