UV Laser Series

UV Laser Marking Machines

Cold 355nm marking for plastics, glass, packaging and fine parts. Low heat effect, clean contrast and precise results.

Request a quote Compare models

Sample marking and material advice before you order. Shipping worldwide.

T-U series desktop UV laser with chiller

5–10 W355nm cold marking

Minimal heatNo melting or distortion

Water cooledChiller included

Desktop or inlineBench unit or flying head

Is this the right fit?

Best for, and what to avoid

Best for

Plastics, glass and fine parts
Packaging date and batch codes
Electronics and small components

Not the best fit

Deep metal engraving (use fiber)
Wood and acrylic (use CO₂)
Large-area high-speed metal marking

Typical production

Desktop low-heat marking
Inline marking on a production line
Fine text and small codes

Marking results

What this series can mark

Short clips from real marking jobs. Final contrast and cycle time depend on the material, surface finish and settings.

Glass Engraving — UV cold marking — **Glass Engraving** UV cold marking

Plastic Button — Backlit marking — **Plastic Button** Backlit marking

UV Plastic — No melting, no distortion — **UV Plastic** No melting, no distortion

Charger Head — Fine marking on small parts — **Charger Head** Fine marking on small parts

Tablet Shell — Coatings and composites — **Tablet Shell** Coatings and composites

Phone Case — Silicone and TPU — **Phone Case** Silicone and TPU

Materials & applications

What you can mark, and how

Material	Recommended source	Typical result	Notes
Plastics	UV	No melting, no distortion	Low heat effect
Glass	UV	Fine, repeatable mark	Cold marking
Packaging	UV	Clean date and batch codes	Coated and film
Electronics	UV	Fine marking on small parts	Water-cooled source
Coated surfaces	UV	Clean contrast	Confirm coating
Bare metal	Fiber	Permanent mark	UV limited on metal

Models & specifications

Choose a model

Select a configuration to see its specifications, or compare every model in the table below. Final configuration and price are confirmed in the quotation.

T-U5 CRS

Desktop UV

Entry-level UV marking for plastics and packaging.

Request a quote

Desktop UV laser marking machine with water chiller

Power5W

Laser sourceCRS

Wavelength355nm

Marking range110 × 110 mm (options available)

Marking speed≤ 7,000 mm/s

CoolingWater cooling, chiller included

MaterialsPlastics, glass, packaging, coatings

PackageMachine + chiller · 45 kg + 26 kg

Model	Group	Power	Laser source	Marking range	Speed	Best for
T-U5 CRS	Desktop UV	5W	CRS	110 × 110 mm (options available)	≤ 7,000 mm/s	Entry-level UV marking for plastics and packaging.
T-U10 CRS	Desktop UV	10W	CRS	110 × 110 mm (options available)	≤ 7,000 mm/s	Higher-throughput UV marking and fine industrial parts.
T-U5 JPT	Desktop UV	5W	JPT	110 × 110 mm (options available)	≤ 7,000 mm/s	Stable, fine UV marking for demanding plastic parts.
T-U10 JPT	Desktop UV	10W	JPT	110 × 110 mm (options available)	≤ 7,000 mm/s	High-precision UV marking with greater throughput.
YT-U5 CRS	Flying UV	5W	CRS	110 × 110 mm (options available)	≤ 12,000 mm/s	Inline UV marking for packaging and moving products.
YT-U10 CRS	Flying UV	10W	CRS	110 × 110 mm (options available)	≤ 12,000 mm/s	High-speed inline UV marking on production lines.
YT-U5 JPT	Flying UV	5W	JPT	110 × 110 mm (options available)	≤ 12,000 mm/s	Precise inline UV marking for fine packaging and parts.
YT-U10 JPT	Flying UV	10W	JPT	110 × 110 mm (options available)	≤ 12,000 mm/s	High-power inline UV marking for demanding production.

Quality & service

Backed from sample to support

Sample testingSend your part and mark content; we confirm the result before you order.

Calibration & QCEvery machine is configured, calibrated and sample-tested before packing.

WarrantyCoverage is confirmed in your quotation. See warranty terms.

Spare partsHigh-wear parts are available with every machine. View accessories.

SupportMaterial advice and troubleshooting. Contact support.

FAQ

Common questions

Why choose UV over fiber for plastics?

UV marks at 355 nm with a low heat effect, so thin plastics do not melt or distort. Fiber is hotter and mainly for metal.

Does a UV laser need a chiller?

Yes. UV sources are water-cooled and ship with a chiller included.

Can it mark glass?

Yes, UV gives a fine, repeatable mark on glass without a heat-affected zone.

Can it deep-engrave metal?

No. For deep metal engraving use a fiber laser. UV is for low-heat surface marking.

Keep reading

Related guides

Practical guide 2 min read

UV laser marking machines for plastics, glass and fine parts

A UV laser marking machine uses a cold 355 nm process that creates fine contrast without the heat-affected zone that can distort thin plastics or delicate components. That makes UV the right choice for packaging, medical products, electronics, glass and coated materials where a clean, repeatable mark matters.

UV laser marking machine for heat-sensitive parts

Need a recommendation? Send the part and mark layout. We confirm the source, power and lens before you order. Get a sample & quote

The DOSLASER UV range includes desktop and flying configurations. Desktop UV systems suit flexible work and small parts, while the flying series marks products as they move through a production line. Water cooling with an included chiller keeps the source stable during long runs.

What UV laser marking is best for

Plastics without melting or distortion
Glass with a fine, repeatable mark
Packaging date and batch codes
Electronics and small components

If you are marking plastics and glass at low heat, read about laser marking technology, then check the material settings library or ask our team for a sample test on your own part.

Water cooling and low heat marking

UV sources run water-cooled with an included chiller, which keeps the 355nm source stable during long production runs. This matters because UV marking is chosen precisely for parts that cannot tolerate heat, so consistent beam output is part of getting a clean result.

If your part is a thin plastic, a coated surface or a small electronic component, a UV test on your sample is the fastest way to confirm the mark quality before you commit.

UV accuracy and part handling

Because UV marking is cold, it suits thin plastics, coated packaging, glass and small electronic parts that would warp or discolour under a hotter process. A water chiller holds the source at a stable temperature, and the small spot size gives fine, repeatable detail on tiny text and codes.

If your work is mixed, review the fiber laser and CO₂ laser pages, or ask us for a sample test on your own material.

Sample before you buy

Send us your part and mark content

We will confirm the laser source, power and marking area, run a sample, and send a clear quotation with shipping to your door.

Request a quote